INSTALLATION

E-Z-GO.............US Patent 6,805,396

Click image for details

Click here for larger picture.
To Install the CoverTech Rear Bag Cover:
 
1. Remove the Rear Bag Cover from its packaging and make certain that all parts are included:
 
- CoverTech Rear Bag Cover Assembly (assembled frame and fabric cover)
 
- Hardware Kit
       - ¼-20 x 3-¼" Hex Bolts (2)
- ¼" Flat Washers (4)
- ¼-20 Lock Nuts (2)
 
2. Remove the factory supplied fasteners securing the hardtop support frame.
 
3. Use the ¼-20 x 3-¼" Hex Bolts supplied in the Rear Bag Cover Hardware Kit to fasten the Rear Bag Cover Frame to the golf car hardtop support frame as shown in the drawing to the left.
 
4. Tighten the locknuts securely.
    
Club Car

Click image for details

Click here for larger picture.
To Install the CoverTech Rear Bag Cover:
 
1. Remove the Rear Bag Cover from its packaging and make certain that all parts are included:
 
- CoverTech Rear Bag Cover Assembly (assembled frame and fabric cover)
 
- Hardware Kit:
       - Steel Angle Bracket (1)
- ¼-20 x 1-¾" Hex Bolts (4)
- ¼-20 Flanged Hex Nut (4)
- ¼-20 Nylon Lock Nuts (2)
- ¼" Plain Flat Washers (6)
 
2. Fasten the Steel Angle Brackets to the Rear Bag Cover Frame with ¼-20 x 1-¾" Hex Bolts and Plain Flat Washers as shown in the installation drawing using the hardware supplied in the Rear Bag Cover Hardware Kit.
 
3. Remove the factory supplied fasteners securing the hardtop to the rear hardtop support frames and attach the Rear Bag Cover to the hardtop support frames (as shown in the drawing to the left) using the new hardware supplied in the Rear Bag Cover Hardware Kit.
 

4. Tighten all hardware securely - taking care not to crush the Rear Bag Cover Frame tubing.